Saturday, July 16, 2011

2010 Harley-Davidson FLSTSE CVO Softail Convertible


Engine and Transmission

Engine: Air-cooled, Twin Cam 110B™
Valves: Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke: 4.0 in. x 4.38 in. (101.60 mm x 111.25 mm)
Displacement: 110 cu. in. (1803 cc)
Compression Ratio: 9.15:1
Fuel System: Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner: Ventilator High Flow Intake w/ Chrome cover, Fiberglass media, exposed element w/ rain sock
Lubrication System: Pressurized, dry-sump
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt, 32/66 ratio
Clutch: Hydraulically actuated, 9-plate, wet, with high-performance spring
Transmission: 6-Speed Cruise Drive®
Gear Ratios (overall): U.S.
1st 9.311
2nd 6.454
3rd 4.793
4th 3.882
5th 3.307
6th 2.790

Performance
Engine Torque (per SAE J1349):
North America: 110 ft. lbs. @ 3000 rpm (149.14 Nm @ 3000 rpm)
Lean Angle (per SAE J1168):
Right: 26°
Lef: 26°
Fuel Economy (EPA urban/highway test): 34/50 mpg (6.92/4.70 L/100 km)

Chassis and Dimensions
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; MIG welded; color-matched to vehicle
Swingarm: Mild steel tube sections, forged junctions; MIG welded; color-matched to vehicle
Front Forks: 41.3 mm telescopic, chrome “beer can” covers
Rear Shocks: Hidden, horizontal-mounted, coil-over
Wheels: Chrome Stinger Cast Aluminum
Front: 18 in. x 3.50 in. (457.20 mm x 88.90 mm)
Rear: 18 in. x 6 in. (457.20 mm x 152.40 mm)
Brakes:
Caliper Type: 4-piston fixed front; 2-piston floating rear
Rotor Type (diameter x width): Single floating Stinger Waved Rotor
Front: 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
Rear: 11.50 in. x .23 in. (292.10 mm x 5.84 mm)
Suspension Travel:
Front Wheel: 5.10 in. (129.54 mm)
Rear Wheel: 3.3 in. (83.82 mm)
Length: 95.10 in. (2415.54 mm)
Overall Width: 39.5 in. (1003.30 mm)
Overall Height: 50.8 in. (1290.32 mm)
Seat Height:
Laden: 24.40 in. (619.76 mm)
Unladen: 25.60 in. (650.24 mm)
Ground Clearance: 3.70 in. (93.98 mm)
Rake (steering head): 32°
Fork Angle: 31°
Trail: 5.80 in. (147.32 mm)
Wheelbase: 64.20 in. (1630.68 mm)
Tires (Dunlop® Harley-Davidson Series, radial blackwall front and rear):
Front – D407: 130/70R18 63V
Rear – D407: 200/50R18 76V
Fuel Capacity (warning light at approximately 1.0 gal.): 5 gal. (18.93 L)
Oil Capacity (w/filter): 3 qts. (2.84 L)
Transmission Capacity: 1 qts. (0.95 L)
Primary Chain Case Capacity: 1 qts. (0.95 L)

Weight:
As Shipped: 724 lbs. (328.41 kg)
In Running Order: 756 lbs. (342.92 kg)
Gross Vehicle: 1260 lbs. (571.54 kg)
Gross Axle

Weight Rating:
Front: 430 lbs. (195.05 kg)
Rear: 830 lbs. (376.49 kg)

Electric
Battery (per Battery Council International Rating): Sealed, maintenance-free, 12V, 19-amp/hour, 270 cca
Charging: Three-phase, 38-amp system (439W @ 13V, 2000 rpm, 489W max power @ 13V)
Starting: 1.4 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):

Headlamp (quartz halogen): 55-watt low beam, 60-watt high beam
Tail/Stop Lights: 28W (21W) self-canceling
Front Signal Lights: 8W/28W (21W) self-canceling
Indicator Lamps: High beam, neutral, low oil pressure, turn signals, engine diagnostics, security system, 6-speed, low fuel warnings10

Color Options
Custom Colors:
Inferno Orange/Vivid Black with Silver Braze Graphics
Abyss Blue/Sapphire with Silver Braze Graphics
Crimson Red Sunglo/Autumn Haze with Metal Grind Graphics







TAG : Harley Davidson Motorcycles, Harley Davidson Parts, Harley Davidson Bikes, Harley Davidson CVO, Harley Davidson Wallpapers
Source: (Thank you and credits to www.motorcycle-usa.com, www.topspeed.com and all sources for the information and pictures)
Read More..

Monday, July 11, 2011

2011 Can-Am Spyder RS

2011 Can-Am Spyder RS - Specifications
MSRP: TBA. See your local Can-Am dealer.

Engine
Manufacturer BRP-Rotax®
Type 998cc, V-twin, liquid-cooled, DOHC 4
Bore & Stroke 3.82 in. x 2.68 in. (97 mm x 68 mm)
Injection Multi-point EFI system with 2.24 in. (57 mm) throttle body
Power 106 hp (79 kW @ 8500 RPM)
Torque 77 lb.-ft. (104.3 Nm @ 6250 RPM)
Transmissions 5-speed manual (SM5) with reverse OR
5-speed semi-automatic (SE5) with reverse
Magneto 500 watts
Starter Electric
Battery 12 volts / 21 amps/hour, sealed maintenance-free
CHASSIS
Frame SST Spyder
Front suspension Double A-arm with anti-roll bar
Front suspension travel 5.69 in. (145 mm)
Rear suspension Swing-arm with monoshock
Rear suspension travel 5.71 in. (145 mm)
Brake type Foot-actuated, fully integrated hydraulic 3-wheel braking system
Front Brake 4-piston calipers with (250 mm x 6 mm) discs
Rear Brake Single-piston sliding pins caliper with (250 mm x 6 mm) disc
EBD Electronic Brake Distribution
ABS Anti-lock Braking System
Parking brake Foot-operated; engages rear caliper
Front Tires 165 / 65 R14
Rear Tire 225 / 50 R15
Front wheel 3 spokes, aluminum, 14 x 5 in. (355 mm x 127 mm)
Rear wheel Aluminum 15 x 7 in. (381 mm x 178 mm)
SAFETY & SECURITY
VSS Vehicle Stability System
SCS Stability Control System
TCS Traction Control System
ABS Anti-lock Braking System
DPS Dynamic Power Steering

DIMENSIONS
L x W x H 105 x 59.3 x 45.1 in. (2,667 x 1,506 x 1,145 mm)
Wheel base 68 in. (1,727 mm)
Seat height 29 in. (737 mm)
Ground clearance 4.5 in. (115 mm)
Dry weight 699 lb. (317 kg)
Front storage capacity 11.6 US gal. (44 l)
Front load capacity 35 lb. (15.9 kg)
Maximum vehicle load 440 lb. (200 kg)
Fuel capacity 6.6 US gal. (25 l)
FEATURES
Instrumentation Multi-function LCD/analog gauge: digital speedometer, tachometer,
odometer, trip & hour meters, gear position, temperature,
engine lights, electronic fuel gauge, clock
Anti-theft system D.E.S.S. (Digitally Encoded Security System)
Lighting 2 halogen headlamps (60W) with tail light/brake light
Windshield 10 in. (250 mm) sport
Warranty 2 years
Transmissions available: SM5 – 5-speed manual with reverse (not available with Pearl White) OR
SE5 – 5-speed semi-automatic with reverse
Colors available: Pure Magnesium Metallic Pearl White







TAG : Bikes, Motorcycles, Can-Am, Can-Am Spyder RS, Motorcycle Gallery, Bike, Can-Am Spesification
Read More..

2011 Yamaha Stryker

The all new 2011 Yamaha Stryker, a machine designed to be ridden… and admired. Chopper inspired styling, attention to detail and mechanical function blend together in a stunning new mid class “chopper”. One ride and you will know we got it right. The style, the performance and that special attitude is intoxicating.

Features
• 1304cc fuel injected V-Twin
• Chopper inspired styling and attitude

ENGINE
• 1304cc (80 cubic inch), liquid-cooled, short stroke, SOHC, 4-valve per cylinder, fuel injected, 60° V-twin powerplant pumps out impressive power and torque for excellent cruising performance.
• Uneven firing interval, bore & stroke dimensions and special ignition & injection mapping all contribute to excellent torque output and that classic V-twin pulse feeling
• Liquid-cooling not only allows for higher state of tune because it maintains more stable operating temperatures, but also reduces mechanical noise for a quieter engine.
• In an effort to maintain the classic air-cooled appearance of the engine, cooling fins have been added as a styling highlight.
• The short stroke engine design reduces the “height” of the engine, while the 60 degree “V” makes the engine more compact thereby centralizing mass and lowering the center of gravity for lighter, more responsive handling.
• One-piece cylinder heads feature 4-valves per cylinder to provide optimum breathing efficiency for maximum power output.
• Stylish chromed cylinder head covers.
• The SOHC valve train features 36mm intake and 32mm exhaust valves with special single coil springs for great power and torque. Valves angles are set at 20 degrees from centre.
• Specially designed roller rockers activate the valves. The rocker system allows a greater amount of valve lift without causing excessive camshaft wear and friction. The slipper portion of the rocker arm features a needle bearing which reduces wear and slide resistance (friction). The camshafts have been specially designed for use with roller rockers.
• Pent roof combustion chamber design and optimized squish area forces the fuel / air mixture toward the centre of the combustion chamber for more complete combustion and hence improved power and cleaner emissions.
• The radiator is mounted between the front frame down tubes to minimize its appearance especially when viewing the machine from the side. Even the rad hoses have been discreetly placed for a cleaner appearance. An electric fan aids in cooling during very hot weather or in stop and go traffic.
• Automatic hydraulic cam chain tensioners reduce mechanical noise and simplify maintenance too.
• Ceramic composite-plated cylinders provide uniform heat dissipation while also reducing friction and weight. The cylinders have a tapered “V” appearance to highlight the V-twin design. Cylinder bore is 100mm.
• High performance forged pistons offer great durability and reduced weight for faster engine response and less mechanical vibration.
• Crankshaft features a single crank pin design. This specially designed crank and uneven firing order helps to enhance the pulse feeling and that unique V-twin engine character.
• Single axis, left and right dual engine counter balancers reduce vibration to a minimum while maximizing rider comfort.
• Crankcase design features internal oil and coolant lines for a clean, air-cooled engine appearance. There are special piston coolers that spray oil at the under side of the pistons.
• Easy access, spin on type oil filter is located under the engine. There is no need to remove any parts to access the oil filter.
• Classic side mounted air box houses a high-flow viscous paper-type filter and adds that special styling touch too.
• Mikuni dual bore, 40mm throttle body fuel injection system with TPS (Throttle Position Sensor) and ISC (Idle Speed Control). This is a “closed loop” system that utilizes an oxygen sensor in the exhaust. The sensor “sniffs” the spent exhaust gases and feeds back info to the ECU which in turn adjusts the fuel/air mixture for maximum power with minimum emissions. The oxygen sensor is located before the mufflers, so the use of slip-on mufflers will not affect this system. Each injector features 12 holes and a dual spray pattern for better fuel atomization and more complete combustion chamber filling. There is one injector per cylinder. Fuel injection benefits include improved fuel economy; choke less operation, reduced emissions, and smoother running.
• High pressure fuel pump is located in a separate sub tank below the seat.
• 2 into 1 into 2 exhaust system features dual slash cut mufflers which provide a specially developed exhaust note that accentuates the V-Twin rumble. The engineers call it the “sound of acceleration”.
• A 3-way honeycomb catalyzer is located at the entry point to the mufflers. The catalyzer reduces harmful exhaust emissions.
• Smooth-shifting, 5-speed transmission with 5th gear overdrive delivers outstanding cruising performance and reduced rpms at highway speeds for comfortable cruising.
• Clean, quiet belt drive system is extremely low maintenance and simplifies customization. The belt features carbon cords for extra strength.
• Air Induction System (A.I.S.) reduces harmful exhaust emissions (CO + HC).

CHASSIS/SUSPENSION
• Double cradle steel frame with “open neck space” provides an aggressive chopper image. This frame utilizes a rigid engine mounting system to optimize the overall rigidity balance of the chassis for superior handling. The rake is 34 degrees with a yoke offset * of 6 degrees. The frame not provides excellent handling and roomy ergonomics but also compliments the beautiful flowing lines of the entire machine.
Important Note: Raked out front fork with lots of trail generally provides good straight line stability but often results in heavy steering at low speeds. The engineers at Yamaha will not sacrifice handling for styling, so they have developed a 6 degree yoke offset angle combined with a 34 degree steering head for a total fork angle of 40 degrees. The “Stryker” provides light “athletic handling and easy steering” not normally associated with a custom styled bike. This bike was designed to be ridden ! Key numbers: 6 degree yoke offset angle, 34 degree caster angle, 109mm of trail.
• Steel swingarm compliments the frame and the overall chassis rigidity balance
• Long 1,750mm (68.9″) wheelbase creates a long, low profile and solid, stable handling. This chassis offers a 45% & 55% front to rear weight distribution and is approximately 60mm longer than the standard V-Star 1300.
• The long low design means spacious ergonomics with lots of leg room, which maximizes rider and passenger comfort.
• Raked out 41mm front fork offers excellent ride comfort and compliance. Chip protectors help to prevent stone chips in the tubes. Front wheel travel is 135mm (5.3″).
• Monocross style, spring preload-adjustable, single-shock, link rear suspension centralizes mass for agile handling. The linkage system provides a rising rate effect that provides excellent compliance on both small and large bumps. There are 9 positions of spring preload adjustability to suit rider preference.
• Rear shock is vertically mounted behind the engine and is tucked out of sight for that classic, clean, hard tail look. Rear wheel travel is 100mm (3.9″).
• Single, large 320mm, floating front disc is squeezed by a compact twin piston front caliper.
• 310mm rear disc brake is squeezed by single piston caliper mounted to the underside of the swingarm. This design not only helps to hide the caliper but also lowers the center of gravity for better handling.
• Newly designed, lightweight 5-spoke cast aluminium wheels are fitted tubeless tires. These stylish wheels are both easy to clean and maintenance-free. The front wheel is a MT3.50 x 21 inch while the rear is a wide MT7.50×18. The narrow front tire (120/70 x 21) and wide rear tire (240/40R18) enhance the chopper styling image.
• Newly designed 1 inch handlebars are mounted directly to the upper handlebar crown without the use of traditional handlebar holders. This design accentuations the chopper profile while also providing an aggressive riding position.
• Newly design deep-bend front and rear fenders enhance the chopper styling. Steel material allows for easy customization and painting if desired.
• 15 litre teardrop shaped fuel tank with chromed filler cap. The long, slim tank design accentuates the bikes muscular styling lines.
• Newly designed one piece rider and passenger seat offers a low 670mm (26.4″) seat height and great styling too. Seating position is best described as sitting “in” not “on” providing a very special “riding attitude”.
• Chromed handlebar-mounted instrument features an analog speedometer, digital odometer, dual tripmeters, fuel gauge, fuel reserve tripmeter (counts kilometres since the fuel went on reserve), clock, and a range of warning lights and self diagnostic functions.
• Instrument functions can be “tabbed” through and re-set using the RHS handlebar switch gear, allowing the operator to change instrument meter functions without taking hands off the bars.
• Newly designed, compact 60/55 watt high intensity halogen headlight emphasizes the “chopper” image.
• Eye catching LED tail light is not only very visible but also uses less electrical power than a conventional bulb style taillight.

ADDITIONAL FEATURES
• Industry-leading Star family fit and finish features rich, lustrous paint and extensive chrome accents creating a machine as stunning as it is powerful.
• Extra wide front brake and clutch levers provide a quality feel.
• Steering lock is integrated into the main ignition switch for extra convenience.
• Low-maintenance, sealed battery ensures fuss-free, dependable starting.
• Self-cancelling turn signals feature stylish clear lenses.

Specifications
MSRP: $11,240 (Impact Blue)
$11,240 (Reddish Copper)
$10,990 (Raven)
Engine
Type 80-cubic-inch (1304cc) liquid-cooled V-twin; SOHC, 4 valves/cylinder
Bore x Stroke 100.0 x 83.0mm
Compression Ratio 9.5:1
Fuel Delivery Fuel injection
Ignition TCI: Transistor Controlled Ignition
Transmission 5-speed; multiplate wet clutch
Final Drive Belt

Chassis
Frame Steel double cradle
Suspension / Front Telescopic fork; 5.3-in travel
Suspension / Rear Single shock; 3.9-in travel
Brakes / Front Hydraulic disc, 320mm
Brakes / Rear Hydraulic disc, 310mm
Tires / Front 120/70-21M/C
Tires / Rear 210/40R18M/C
Wheels 5-spoke cast aluminum

Dimensions
Length 99.6 in
Width 33.9 in
Height 44.5 in
Seat Height 26.4 in
Wheelbase 68.9 in
Fuel Capacity 4.0 gal
Fuel Economy** 40.9 mpg
Wet Weight*** 646 lb


Read More..

Friday, June 17, 2011

2011 Honda CBR600F

Big idea for 2011 was to repurpose existing or old models into brand new ones. First, the VFR800 turned into the 2011 Honda Crossrunner and now the Honda Hornet gains a fairing, transforming it into the 2011 Honda CBR600F.

The greatest-ever 600cc middleweight is coming back. We've secured images of Honda's 2011 CBR600F - the real world sports 600 that's dominated the middleweight sportsbike class for the last 23 years.

The 2011 Honda CBR600F fatures a 16-valve engine, producing around 120bhp at 12,000rpm, the subtly-styled CBR boasts and aluminium girder frame, 41mm front forks, a single rear shock and an 800mm seat height. The new Honda CBR600F also equipped with a 180-section rear tyre for that all-important big bike look, and 17-litre fuel tank.







TAG : Honda, CBR600F, Motorcylce 2011, Reviews, Specifications, Heavy Bikes, Heavy Bikes 2011, Heavy Bike, Heavy Bike 2011, Heve Baeik, Heavy Bike Picture
Read More..

2011 Triumph Daytona 675R

This is an updated Daytona 675, mostly targeted for the track use. They put new high-end forks on it, especially for this bike developed by Öhlins (43mm NIX30). Just like Suzuki, it got new Brembo monoblock calipers. It is also equipped with quick shifter, and bodywork was enriched with some carbon fiber. Instrumentation now includes a lap timer and programmable gear change lights.
Engine remained the same. This model is available exclusively in one special color scheme – Crystal White with Jet Black Belly Pan Split.

Daytona 675R in brief:
- Color: Crystal White with Jet Black Belly Pan Split
- Seat Height: 830 mm (32.7 in)
- Curb Weight: 185 kg (412 lbs)
- Power: 125 HP (92 kW)







TAG : Triumph, Daytona 675R, Motorcylce 2011, Reviews, Specifications, Heavy Bikes, Heavy Bikes 2011, Heavy Bike, Heavy Bike 2011, Heve Baeik, Heavy Bike Picture
Read More..
Related Posts Plugin for WordPress, Blogger...